陶瓷新型胶态成型工艺

《陶瓷来自新型胶态成型工艺》是2010年清华大学出版社出360百科版的图书，作者是黄勇、杨金龙。

本书系统、完整地介绍了清华大学黄勇科研组在20多年里在高性能陶瓷成型工艺领域取得的研究成果，同时，还论述了其他国家学者近年来在陶瓷成型领域所取得的远话天子任研进展。本书内容分为7章，包括:基于凝胶体系里穿省次甚的陶瓷胶态注射成型新工艺;陶瓷基片的凝胶流延工艺;无毒或低毒乐帝汽屋布防出体系凝胶成型工艺;陶瓷制备过程中缺元部级朝编庆族普陷的产生、演化、遗传和控制:非氧化物陶瓷凝胶注模成型新工绿艺;胶态成型工艺的应用;胶态成型工艺新方法和新技术。

• 书名 陶瓷新型胶态成型工艺
• 作者 黄勇，杨金龙
• 出版社 清华大学出版社
• 出版时间 2010年7月1日
• 定价 120 元

内容简介

　占倍地聚跟感弱浓掌行　本书内容分为7章，包括:基于凝胶体系的陶瓷胶态注射成型新工艺;陶瓷基片的凝胶流延工艺;无毒或低毒体系凝胶成型工艺;陶瓷制备过程中缺陷的产生、演化、遗传和控制:非氧化物陶瓷凝胶注模成型新工艺;胶态成型来自工艺的应用;胶态成型工艺新方法和新技术。

目录

　　Chapter 1 Aqueous Colloidal Injection Molding of Ceramics Based on Gelation

　　1.1 Colloidal Injection Molding

　　1.1.1 The Concept of CIMC

　　1.1.2 The Flowchart of CIMC

　　1.1.3 Th360百科e Machine of CIMC

　乱较害　1.2 Pressure Induced Form包古入言突十ing

　　1.2.1 Effect of Hydrostatic Pressu读波控室re on Solid广继刚境屋触击官企越ification

　　1.2.2 Homogeneity of the Green Bod印态院兵想坚变待括走究ies

　　1.2.3 Controlling the Inner S轻命再理tress in the Green Body

　　1.3 Storage Stability of Ceramic Slurries

　　1.3.1 The Importance of Storage Stability of Slurry

　　1.3.2 Chemical Stability

　　1.3.3 Inhibitor for Slurry Storage

　　1.4 To Prepare High Reliability Ceramic Parts with C素omplex Shapes: Aq女年级建县ueous Colloidal Injection Molding

　　References

　　Chapter 2 Gel-T极失光边船特乙过车ape-Casting of Ceramic Substrates

　　2.1 Fundamental Prin据列千福和ciple and Processing of Aqueous Gel-Tape-Casting

　　2常胜越初良如五二费就.1.1 Tape Casting Types and the Raw Materials

　　2.1.2 Polymerization of the Monomer

　　2.1.3 Influence Factors on Polymeriza明界味tion of the Mon入手背该衡算模力omer

　　2.1.4 Processing of the Gel-Tape-Casting

　　2.2 The Characteristics of Slurries Us得封带ed for Aque斗色组类打先全威确间ous Gel-Tape-Casting

　　2.2.1 The Prop属介花审erties of the Aqueous Ceramic 乎茶香Slurries with Binder

　　2.2.2 The Influence of Dispersants on Stability and Rheology of Aqueous Ceramic Slurries with Organic Monomer

　　2.2.3 The Influence of Plasticizer on Properties of Aqueous Ceramic Slurry with Organic Monomer

　　2.2.4 The Influence of pH on the Properties of Slurries with Organic Monomer

　　2.2.5 The Effect of Surfactant on Wetting and Green Tape Releasing (Separating)

　　2.2.6 Foam and Pore Elimination

　　2.2.7 Sintering of Green Tape Prepared by Slurry

　　2.3 Aqueous Gel-Tape-Casting with Styrene-Acrylic Latex Binder

　　2.3.1 The Importance of Binders in Gel-Tape-Casting Process

　　2.3.2 The Forming Film Mechanism of Latex Binder

　　2.3.3 Raheological Properties of the Alumina Slurries with Binder

　　2.3.4 The Physical Properties and Microstructure of Green Tapes with Latex Binder

　　2.4 A Gel-Tape-Casting Process Based on Gelation of Sodium Alginate

　　2.4.1 Why Study on Tape Casting of Sodium Alginate

　　2.4.2 The Preparation of Aqueous Alumina Suspensions with Sodium Alginate and Calcium Phosphere Tribasic

　　2.4.3 Control of the Gelation of Sodium Alginate

　　2.4.4 Characterization of Green Tapes

　　2.5 The Spray Trigger Fast-Curing for the Gel-Tape-Casting Process

　　2.5.1 The Idea of the Spray Trigger Fast-Curing

　　2.5.2 Outline of the New Process

　　2.6 The Features and Prospects of the Aqueous Tape-Casting

　　References

　　Chapter 3 Gelation Forming Process for Low Toxicity System

　　3.1 Gelation Forming of Ceramic Suspension with Agarose

　　3.1.1 Characteristics of Agarose

　　3.1.2 The Effect of Agarose Contents on the Rheology of Aqueous Ceramic Suspensions

　　3.1.3 The Forming Courses of the Aqueous Ceramic Suspensions with Agarose

　　3.2 Alumina Casting Based on Gelation of Gelatine

　　3.2.1 Characteristics of Gelatine

　　3.2.2 The Gelation Process of the Ceramic Slurry with Gelatine Solution

　　3.2.3 The Preparation of Green Body Using Slurry with Gelatine Solution

　　3.3 A Casting Forming for Ceramics by Gelatine and Enzyme Catalysis

　　3.3.1 Research Background

　　3.3.2 The Gelation Mechanism of Gelatine Solution with Urea under Enzyme Catalysis

　　3.3.3 The Rheology and Zeta Potential of Alumina Suspension Containing Gelatine and Urea

　　3.3.4 The Coagulation Forming and Microstructure of Green Body

　　3.4 The Alumina Forming Based on Gelation of Sodium Alginate

　　3.4.1 Research Background

　　3.4.2 The Gelation Principle of Sodium Alginate

　　3.4.3 The Preparation Process of Alumina Green Bodies and Samples by Sodium Alginate

　　3.5 The Gel-Casting of SiC Based on Gelation of Sodium Alginate

　　3.5.1 Introduction of the Research

　　3.5.2 The Effect of Dispersant on the Colloidal Behaviors of the SiC Suspension

　　3.5.3 The Rheological Property of SiC Suspension

　　3.5.4 The Sedimentation Behavior of the SiC Suspension

　　3.5.5 The Gelation Principle and Process of the Alginate Solution

　　3.5.6 The Gelation of the SiC Suspension with Alginate

　　3.6 The Alumina Gel-Casting with a Low-Toxicity System of HEMA

　　3.6.1 The Academic Idea and Research Program

　　3.6.2 The Colloidal Chemistry and Rheological Property

　　3.6.3 The Binder Burnout and Application of the New System

　　3.7 The Synergistic Low-Toxicity Gel-Casting System by Using HEMA and PVP

　　3.7.1 The Academic Idea and Research Program

　　3.7.2 Zeta Potentials and Rheological Properties

　　3.7.3 The Activation Energy and Solidification

　　3.7.4 The Green Strengths and Microstructures

　　3.7.5 The Exfoliation Elimination Effect and Analysis of the Interaction between PVP and HEMA Molecules

　　References

　　Chapter 4 Generation, Development, Inheritance, and Control of the Defects during the Transformation from Suspension to Green Body

　　4.1 The Rheological Behaviors of Aqueous Ceramic Suspensions

　　4.1.1 The R.heological Behaviors of Aqueous Alumina Suspensions

　　4.1.2 The Effect of Rheological Properties of Suspension on Mechanical Strength of Ceramics

　　4.1.3 The Effect of Solid Loading on Colloidal Forming

　　4.2 The Generation and Development of Defects

　　4.2.1 The Generation Mechanisms of Agglomerations in Ceramic Suspensions

　　4.2.2 The Influences of Idle Time on Microstructures and Mechanical Properties of Green Bodies by Direct Coagulation Casting

　　4.3 The Effect of Ionic Conductance on Preparation of Highly Concentrated Suspension

　　4.3.1 The Academic Idea and Research Program

　　4.3.2 The Relationship Between Ion Conductivity Constants and Solid Loading

　　4.4 Control of Inner Stress in Green Body

　　4.4.1 Origin, Transformation and Control of Inner Stress in Green Body

　　4.4.2 The Release and Control of Inner Stresses in Ceramic Green Body

　　4.5 The Suppression of Surface-Exfoliation with the Addition of Organic Agents

　　4.5.1 The Suppression of Surface-Exfoliation by Introducing PAM into Monomer System in Suspension

　　4.5.2 The Suppression of Surface-Exfoliation by Introducing Polyethylene Glycol into Monomer System in Suspension

　　4.5.3 The Suppression of Surface-Exfoliation by Introducing Poly-vinylpyrrolidone (PVP) into Monomer System in Suspension

　　References

　　Chapter 5 The Gel-Casting of Non-Oxide Ceramics

　　5.1 The Effects of Powder Surface Modification on Concentrated Suspensions Properties of Si3N4

　　5.1.1 The Contributing Factor and Elimination of Macropores in Si3N4 Green Bodies

　　5.1.2 The Effect of Foreign Ions on Concentrated Suspension of Si3N4

　　5.1.3 The Effect of Acid Cleaning and Calcinations on the Suspension Properties of Si3N4

　　5.1.4 The Effect of Liquid Medium and Surface Group on Dispersibility of Si3N4 Powder

　　5.2 The Gel-Casting of Si3N4 Ceramics

　　5.2.1 The Preparation of Si3N4 Ceramics with Surface-Coated Si3N4 Powder

　　5.2.2 The Preparation of Si3N4 Ceramics with Surface-Oxidized Si3N4 Powder

　　……

　　Chapter 6 Application of New Colloidal Forming

　　Chapter 7 The New Methods and Techniques Based on Gel-Casting

　　Appendix

　　Index of Terms

　　Index of Scholars

　　Postscript